* The indicated speed must not be more than 110 percent of the true speed plus 4 km/h at specified test speeds. it should not be possible to inadvertently speed because of an incorrect speedometer reading. * The indicated speed must never be less than the actual speed, i.e.What is BMW's 6WB digital instrument cluster? How does it differ from the standard analog and 6WA hybrid clusters? And most importantly, is it worth adding t. Turns out it is a software glitch! Take it your service center to get reprogrammed.

Make sure your car is on while you do this. Push and hold the volume button (next to the presets) until the screens go black. Then route the wiring …I would recommend doing a hard reset on the iDrive. Install a new sensor with a thin coating of Molykote Longterm 2 or similar grease to the ABS sensor and housing. If you have a heads up display, this will change.Slide the sensor (red arrow) out of the wheel hub (blue arrow). keep looking! If you have bimmercode and the digital readout is on the display, this will also change. basically you go into the idrive and change the vehicle settings to KMH I can't remember if it's vehicle settings or display settings, but it's in there. The reversing lines are easier though When you put the car into reverse there are some options on the iDrive display on the left side to enable the guide. Would like digital display in mph.The digital speedo in the instrument display can be enabled, but only through coding with a laptop and BMW software or using a (paid-for) mobile app and hardware dongle in the diagnostic port. iTrader: ( 0) Just to clarify, below is the dim and simple display you get when you don't give BMW an extra $900 for the should-be-standard Live Cockpit Pro, and the km/hr speedo that displays when you change the units to km.

Would like digital display in mph.Drives: 2022 X3. Bmw x3 digital speedometer defaults to km Drives: 2022 X3.

Bmw idrive upgrade